Cover Crops | | Latham Hi-Tech Seeds

Latham Hi‑Tech Seeds

Drive Yield with Soil Health and Customized Plant Nutrition
It’s no secret that optimal yields result from a combination of many factors: environment, plant nutrition and nutrients to name a few.

Plant nutrition is key to maximizing the yield potential of today’s plant genetics. To meet the intensive nutritional demands of these plants, there must be a higher fidelity to soil condition and nutrition. Removing nutrients removes nutrition from the soil reserves.

There is a no “one-size-fits-all” nutrition program, and there are many variations of soils and environments. So customizing nutrition programs by field can help optimize yield. Today’s technology allows us to do just that!

Many years ago, we heard about a farmer who found a unique combination of cover crops that worked well for his soils and climate. He tracked everything precisely and found that soil organic matter (OM) increases by 0.1% each year. This may not seem like much, but the impacts are exponential. In 10 years, you gain 1% more OM. For every 1% OM, the soil can hold 1 acre inch of rain. That’s 27,000 gallons of water.

This farmer is improving water and nutrient-holding capacity of the soil in the root zone. During drought years, his farm’s yield was only down 10 bushels while the average yield decrease was 60 bushels. Plus, his farm produced the same yields using less nitrogen (N), phosphorus (P) and potassium (K) because leaching is reduced.

Why not experiment on your own farm? Start small and see how you can capture more yield on the same acre. Here are a couple resources to help you get started:
- Try Something New
- On-Farm Research Helps Find Palatable Solutions
Did you enjoy this article? We want to (TECH)talk with you! Sign up for our newsletter to receive agronomy articles (and delicious recipes) in your inbox! We’ll talk soon.
Webspec Admin

February 22, 2023

Agronomics, Cover Crops, Crop, Disease, Emergence, Fertility, General, Growth Stages, Soil
Latham Hi‑Tech Seeds

#AsktheAgronomist – Cover Crop Termination

Phil Long, precision agronomy advisor, battles the wind to bring us a field update! He highlights cereal rye and when it should be terminated.

Check out The Field Position for more industry and agronomy topics!

Webspec Admin

April 26, 2022

#AskTheAgronomist, #FromTheField Crop Reports, Cover Crops, From the Field, General, Growth Stages, Spring
Latham Hi‑Tech Seeds

Try Something New!
Precision Agronomy Advisor, Phil Long

A common theme you will hear when listening to national corn/soybean contest winners is they always use a few acres to try something new. Latham’s Forage Products Manager, Corey Catt, has written numerous articles, encouraging growers to use a few acres to experiment on their own farms with products, seeding rates and management practices.

While third-party research plays an important role in helping us choose seed products, it’s also important to conduct your own on-farm research. Here are a few ideas to try this growing season. If you have acres that struggle with Sudden Death Syndrome, try treating a few soybean units with Latham® SoyShield^TM Plus with Saltro and run a side-by-side comparison. Another idea is to apply sulfur to soybeans and measure your results. Experiment on a few corn acres with Xyway® 3D in-furrow fungicide or try a phosphorus-enhancer, such as Encompass from TALC USA.

You could create quite a list of new products, different tillage/planting practices, in furrow fertilizers, or in-season practices that you could try to break your farm’s yield plateau. Here are some tips to make the most of your on-farm research efforts:
1. Use a decent farm, or part of a decent farm, to do your research. Use a farm that has soil types and drainage/topography characteristics that represent a lot of your acres. Don’t pick the less desirable ground in terms of fertility. If pH, phosphorus (P), and potassium (K), levels are wacky, you won’t learn much when trying a new in-furrow treatment, biological or fungicide. Basic needs must be taken care of before you can add more yield.
2. Keep it short and simple (K.I.S.S.). Weather and soil types cause enough variation in any research that you don’t need to add complexity. Try one thing at time, so you’re not adding multiple factors into the equation. For example, run a planter pass with Xyway mixed in your starter fertilizer and then shut it off the next pass. Do these two “treatments” at least three more times across your field to reduce the influence of soil types on your results.
3. Garbage in, garbage out. Make sure your monitors/globes/planting equipment have the latest update, so you can capture the data when it’s go time. Layout your research, so your combine can capture it. This is very important! For example, if you harvest with an 8-row head, change “treatments” on 20-foot increments.
Mapping what you do this spring will allow you to analyze it next fall. You will want to look at how that new product did in your heavy soils, lighter soils and whether it is worth expanding on more acres next year. Every year is different, so keep weather in mind as it is usually the #1 influencing factor. Start small to find out what works best on your farm. I am happy to help you figure out what new thing to try on a few acres. Give me a call and we can chat more about it at: 641-692-0370.
Phil Long

April 21, 2022

Agronomics, Alfalfa, Corn, Corn Silage, Cover Crops, Crop, Disease, Emergence, Fertility, Fungicide, General, Precision Ag, Season, Seed Treatment, Soil, Soybeans, Spring
Latham Hi‑Tech Seeds

Start the Season Right by Planting the Right Genetics
With the 2022 planting season right around the corner, it’s time to focus on the one thing that will help you capture the most ROI in each field.

Field-by-field product placement is key to maximizing yield – and in turn – profit. Research shows plant genetics account for a 20% difference in yield. This means you could raise 12 more bushels of soybeans and 40 more bushels of corn PER ACRE simply by paying closer attention to your crop placement.

Below are three factors to consider when double-checking your crop placement for 2022:
- Study Field x Field® Ratings. Look at the Field x Field Ratings in the Latham® Product Guide for corn and soybeans. These charts simplify where you should place hybrids and varieties. A “1” rating means it’s a great fit for a particular environment; a “3” rating means you should not plant that product if your field conditions match that description. Your Latham Dealer has seen most of our products in environments, so call him or her if you have additional questions about where to place a particular product.
- Stick to the plan. If your seed dealer has provided you with a Field x Field plan, organize your seed shed so you can stick to the plan. Subscribers to Latham Seeds’ Data Forward® program receive a crop plan book, which you can keep in your planter tractor. It’s a good practice to double check that the right seed gets in the planter. If planting conditions change in a particular field, then take the time to move products. It will be worth an hour of your time to capture the extra $150 to 200 per acre in profit potential.
- Match Genetics to Management. If a certain corn product is described as “likes high management,” then you should not place that product in a field with poor fertility levels. Your seed dealer may not know your fields’ fertility levels unless you share it. That information is critical for accurate product placement as some genetics can handle tough fertility situations and others will fall apart in those environments. Also make sure you aren’t overplanting or underplanting each hybrid. Look at the “suggested populations” in our Product Guide, as well as the “Ear Type” rating and our stress wheel poster. We want to help you capture yield!
If you’re planting soybeans early or at the same time your planting corn, treat the seed with SoyShield® to protect it from early season fungal diseases. Seed treatment also gives seedings an early advantage. Even when using a quality seed treatment, plant fields with the heavy soils that remain wet and cold last or at least the soils have warmed. This will help your soybeans better ward off root diseases all season long.

A successful 2022 crop year begins with having a plan and sticking to it! Take the time now to double-check that you properly matched plant genetics with soil conditions. Our dealers are also happy to talk through field placement as well. If you have further questions or want to chat with our agronomists call: 1.877.GO.LATHAM (1.877.465.2842).
Phil Long

February 9, 2022

Agronomics, Alfalfa, Corn, Corn Silage, Cover Crops, Crop, Disease, Emergence, Fertility, General, Precision Ag, Seed Technology, Seed Treatment, Soil, Soybeans
Latham Hi‑Tech Seeds

Ask The Agronomist: Prepping The Seed Bed

How much tillage is too much? Phil Long discusses proper seed bed preparation and the importance of protecting moisture in the ground. #AskTheAgronomist

:20 – Welcome

1:40 – Topic introduction

3:00 – GDUs, rainfall averages and soil temperatures

4:40 – Soybean germination

5:15 – Conserving moisture in the seed bed

6:40 – Optimal seed depth

7:27 – Soil sealing

10:36 – Cover crops and early termination

11:35 – Final thoughts

Laura Cunningham

April 30, 2020

#AskTheAgronomist, Agronomics, Cover Crops, Crop, Season, Soil, Soybeans, Spring
Latham Hi‑Tech Seeds

Managing Soil Erosion

Soil erosion resulting from heavy rainfall events and wind leads to the loss of essential soil nutrients and soil carbon. Eroded soil and the loss of organic matter essential for supporting crop growth can damper corn and soybean production and reduce yield. Across the Corn Belt, an observed 20% increase in rainfall has led to a 40% increase in soil erosion. Record breaking flooding across the Midwest has further exacerbated erosion.

Identify Soil Erosion

Gully erosion is one of the most pronounced forms of erosion and its large grooves that form in the soil following heavy rainfall make it easy to identify. Less evident to the naked eye are signs of erosion that can be identified by looking for standing water in the field. Puddles of water seen after a rainstorm that are clouded with sediment suggest erosion is occurring whereas puddles of clear water are a sign of minimal erosion. Lighter colored soil seen overtime is also a sign of erosion but can be more difficult to identify.

In Iowa, the average rate of erosion has been five tons of soil per acre every year with intense weather events worsening rates, in some cases reaching 100 tons of soil per acre per year. The loss of natural vegetation can lead to greater rates of erosion from both wind and water. Using cover crops and no-till are the most effective methods for reducing and preventing erosion, increasing soil water holding capacity and boosting moisture content.

Take Action with Promising Solutions

Annual cover crops such as winter rye can be planted in the fall to preserve the soil over the winter and reduce erosion. PROTECTioN™ Cereal Rye, DRILLER™ Daikon Radish and FIXatioN Balansa Clover can be planted in the late summer and early fall to enrich organic matter and reduce soil loss. Perennial cover crops including legumes and fescue have established root systems that can prevent the loss of soil nutrients to rain or weather erosion. Legumes are also nitrogen fixing and can support crop growth.

In addition to integrating cover crops and no-till, terracing or planting grasses near waterways can prevent the formation of gullies. Buffer and filter strips can reduce the loss of soil nutrients and runoff of fertilizer and pesticides. Prairie strips can be implemented by planting perennial grasses to protect topsoil and prevent the loss of organic matter. Integrating a combination of these methods with cover cropping can combat soil erosion and offer great protection for your corn and soybean crops.

Latham Seeds Agronomy Team

January 14, 2020

Corn, Cover Crops, Crop, Soybeans, Spring, Tech Tuesday, Winter
Latham Hi‑Tech Seeds

#AskTheAgronomist: Late Season Cover Crops

Today on #AskTheAgronomist we are discussing late season cover crops and the benefits below the ground.

0:40 — Crop report update
1:50 — Dec. 1 Iowa cover crop planting deadline
2:42 — Cover crops and compaction
3:33 — Cover crop below-ground benefit
6:50 — Cover crop investment
8:30 — Cereal rye germination
11:35 — Final thoughts

Laura Cunningham

November 7, 2019

#AskTheAgronomist, Cover Crops, Crop
Latham Hi‑Tech Seeds

Our “Secret Sauce” is Saltro® Fungicide

One of the reasons we use Saltro is because it protects early-season plant health, plus protects plants against Soybean Cyst Nematode (SCN) and Sudden Death Syndrome (SDS). Soybeans treated with Saltro have strong emergence, better stands, healthier leaves and develop more robust early-season root mass. As a result, soybean plants treated with Saltro can reach their full genetic and yield potential.

Saltro also doesn’t cause additional plant stress, like the halo effect we’ve seen with older chemistries. Soybeans can outgrow the side effects from early-season, above-ground stress, but they may not fully recover from the lower yield potential caused by below-ground stress.

While touring the Syngenta Seedcare Institute in Minnesota, a group of Latham representatives were told Saltro is safer and more effective than the current standard seed treatment. More than three years of research shows that soybeans treated with Saltro have a 3-bushel per acre yield advantage over the leading SDS competitor in heavy SDS pressure and a 1.8-bushel yield improvement under low SDS pressure.

Another advantage we saw first-hand on our tour is that Saltro has 22% better wet seed flow than its leading competitor. Saltro has a much lower use rate. In addition, the leading competitor creates 63% more buildup and 100% more dust than Saltro.

Improved handling and treatment efficiency, higher yields, no plant stress, as well as superior SDS and SCN protection are the reasons why Latham Seeds is making our unique Saltro blend available for the products we’re selling for next planting season. Ask your Latham® representative for more information!

Mark Grundmeier, Product Manager

September 17, 2019

Agronomics, Cover Crops, Crop, Season, Seed Treatment, Spring, Tech Tuesday, Winter
Latham Hi‑Tech Seeds

#AskTheAgronomist: Fall Seeding Cover Crops

Phil Long shares information on fall seeding cover crops and the benefits associated with this practice.

0:30 – Crop report update
1:42 – Cover crop topic introduction
2:42 – Fall seeding options
4:08 – What’s your goal?
4:45 – Rye benefits
7:45 – Weed suppression
11:48 – Herbicides effect on cover crops
12:32 – Field Day Preview

Laura Cunningham

August 29, 2019

#AskTheAgronomist, Agronomics, Cover Crops, Crop, Soil
Latham Hi‑Tech Seeds

Cover Crop Options for Prevent Plant Acres
If considering cover crops for prevent plant acres, the first step is to talk with your insurance agent, early and often. Knowing your options for payments, cover and potential harvest or termination are important parts of the overall plan.

Should your plan include the use of a cover crop, here are some considerations to include in that planning process.

Before ordering, take inventory:
1. Did you already apply a herbicide?
2. If yes, what herbicide and does any residual affect which cover crops you can select?
3. To review common watch-outs for herbicide residual, this guide from Penn State University is helpful
4. What is your overall goal?
  - Weed suppression, Erosion Control or Nutrient Fixation for row crop;
  - Or Forage for Livestock
FORAGE OPTIONS

If the main goal is forage for livestock or grazing, timing matters. To receive full prevent plant payment the cover crop must not be harvested before November 1. If the main goal is tonnage, some crop options yield higher quality forage if harvested prior to November 1. Here are some crop options to consider:

Goal: Forage Harvesting After November 1 (for full Prevent Plant Payment)

Cereal Rye, also Winter Triticale, Winter Wheat

These cereal grain options provide fast establishment in dry or wet conditions and good weed suppression. In terms of forage quality, fields planted early to Mid-August will provide best growth, but will start to lose biomass and quality by November 1. All cereals planted earlier than the August time-frame will struggle to overwinter if planted early summer.

Ryegrass and Berseem Clover Mix

When seeded at about 15 lbs/a this cover crop mix can provide the benefit of fast establishment with excellent forage quality. It can tolerate close grazing and has good hay potential. Great weed suppression and a strong fiberous root system help break up layers of compaction. Berseem clovers adds 50-100lbs/A nitrogen to the mix for corn next season. Great before corn.

Goal: Forage Harvesting Prior To November 1 (for maximum forage tonnage and quality)

Oats

Oats are a great option for quick establishment, fast growth and a good palatable feed. We recommend them in a mix with a legume for added livestock benefit. If mixing, consider Oats with Sorghum-Sudangrass and/or turnips for early summer plantings and for late summer Oats with Berseem Clover.

Italian Ryegrass

Italian Ryegrass is another option for fast establishment while providing excellent forage quality. This crop tolerates close grazing and would have good hay potential with its higher tonnage as well.

Sorghum Sudangrass and Pearl Millet

These warm season options can be grazed within 4-5 weeks with medium to high palatability for livestock. These options would also provide high biomass for haying or chopping for silage.

Teff Grass

Teff grass is fast-growing and can be harvested in 60 days. It’s fine-stemmed with medium palatability for livestock feed.

GROUND COVER OPTIONS

Cereal Rye (Overwinters)

As mentioned before cereal rye provides fast establishment in dry or wet conditions and provides great cover for erosion control, weed suppression and organic matter to build soil health.

Ryegrass and Berseem Clover Mix (Winterkills)

When seeded at about 15 lbs/a this cover crop mix can provide the benefit of fast establishment with excellent forage quality. It can tolerate close grazing and has good hay potential. Great weed suppression and a strong fiberous root system help break up layers of compaction. Berseem clovers adds 50-100lbs/A nitrogen to the mix for corn next season. Great before corn.

Oats and Radish (Winterkills)

Oats and radish is another mix that can provide the cover needed for weed suppression when planted anytime from June to August. Fast growth and large amounts of aboveground biomass are perfect for holding onto nutrients from manure applications or fertilizer applied. Great before soybeans.

Berseem Clover: (Winterkills)

Berseem Clover is a quick growing summer annual clover with the main benefit being that it can produce 50-100 lbs/A of nitrogen for the following corn crop.

Disclaimer: There are several options available for prevent plant acres, please contact us at 1-877-GO-LATHAM to inquire about the benefits of different mixes. Be sure to communicate with your crop insurance company to understand the rules and regulations for planting a cover or forage crop before or after your “final plant date” and/or “Late Plant Date” in your state.
Phil Long

June 11, 2019

#AskTheAgronomist, Cover Crops, Crop, Flooding, Weather